Defort DBS-800N User Manual download pdf (Page 6)

Belt sander

INTENDED USE

This tool is intended for dry sanding with high removal

performance of wood, plastic, metal, etc.

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/off switch

2 Knob for locking on/off switch

3 Lever for changing sanding belt

4 Arrow

5 Knob for adjusting belt centering

6 Dustbag

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

 Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

 Always keep the cord away from moving parts of the

tool; direct the cord to the rear away from the tool

 When you put away the tool, switch off the motor and

ensure that all moving parts have come to a complete

standstill

 Use completely unrolled and safe extension cords

with a capacity of 16Amps (U.K. 13 Amps)

 In case of electrical or mechanical malfunction, imme-

diately switch off the tool and disconnect the plug

 SBM GROUP can assure ﬂ awless functioning of the

tool only when original accessories are used

 This tool should not be used by people under the age

of 16 years

 The noise level when working can exceed 85 dB(A);

wear ear protection

 If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect the

plug

 Never use tool when cord is damaged; have it re-

placed by a qualiﬁ ed person

 Always check that the supply voltage is the same as

the voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

 This tool is not suitable for wet sanding

 Do not work materials containing asbestos (as-

bestos is considered carcinogenic)

 Take protective measures when during work dust

can develop that is harmful to one’s health, com-

bustible or explosive (some dusts are considered car-

cinogenic); wear a dust mask and work with dust/chip

extraction when connectable

 When sanding metal, sparks are generated; do not

use dustbox/dustbag/vacuum cleaner and keep other

persons and combustible material from work area

 Do not touch the running sanding belt

 Do not continue to use worn, torn or heavily clogged

sanding belts

 Wear protective gloves, safety glasses, close-ﬁ tting

clothes and hair protection (for long hair)

 Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K.

ONLY):

 Do not connect the blue (= neutral) or brown (= live)

wire in the cord of this tool to the earth terminal of the

plug

 If for any reason the old plug is cut off the cord of

this tool, it must be disposed of safely and not left unat-

tended

 before the sanding surface reaches the workpiece,

you should switch on the tool

 before switching off the tool, you should lift it from

the workpiece

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

Defort DBS-800N User Manual Page 6

Comments to this Manuals